Product Specification
| Brand | Notifier |
| Voltage | 15-32 volts DC peak |
| Weight | 3.4oz (96.4g) |
| Humidity | 10%-93% noncondensing |
| LED Current (Max) | 4.5mA @ 24 VDC |
| Stand By Current | 200 Micro A at 24VDC |
| Thermal Rating | 135 Degree F (57 Degree C) |
| Operating Temperature | 0 Degree C to 50 Degree C (32 Degree F to 122 Degree F) |
| Velocity Range | 0-4000 ft/min |
Product Description
The Notifier FSP-951 Series intelligent plug-in smoke detectorsare designed for both performance and aesthetics. A new modern,sleek, contemporary design and enhanced optical sensing chamberis engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. TheFSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored andreported to the panel. Point ID capability allows each detector’saddress to be set with rotary, decimal address switches, providingexact detector location for selective maintenance when chambercontamination reaches an unacceptable level. Dual electronicthermistors add 135°F (57°C) fixed temperature thermal sensing onthe FSP-951T. The FSP-951R is a remote test capable detector foruse with DNR Series duct detector housings. FSP-951 series detectors are available for both FlashScan® and CLIP applications asdesignated.
Features
• New modern profile for improved aesthetics.
• Designed to meet UL268 7th Edition.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Compatible with FlashScan® and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 onFlashScan systems).• Optional remote, single-gang LED accessory.
• Dual LED design provides 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector isaddressed, and illuminate steady red on alarm (FlashScan systems only).
• Remote test feature from the panel.• Walk test with address display (an address on 121 will blink thedetector LED: 12-[pause]-1(FlashScan systems only).• Built-in functional test switch activated by external magnet.
• Built-in tamper-resistant feature.• Sealed against back pressure.
• Expanded color options.
• SEMS screws for wiring of the separate base.
• Optional relay, isolator, and sounder bases.
Features
• New modern profile for improved aesthetics.
• Designed to meet UL268 7th Edition.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Compatible with FlashScan® and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 onFlashScan systems).• Optional remote, single-gang LED accessory.
• Dual LED design provides 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector isaddressed, and illuminate steady red on alarm (FlashScan systems only).
• Remote test feature from the panel.• Walk test with address display (an address on 121 will blink thedetector LED: 12-[pause]-1(FlashScan systems only).• Built-in functional test switch activated by external magnet.
• Built-in tamper-resistant feature.• Sealed against back pressure.
• Expanded color options.
• SEMS screws for wiring of the separate base.
• Optional relay, isolator, and sounder bases.
